CNC computer gong processing tool

CNC computer gong processing tool

1、 Try to install the material first and then the cutter, so as to prevent the hand from touching the cutter when installing the material. If the cutter has been installed, when loading the material, the worktable should be moved to the outside to ensure that the material will not interfere with the cutter, so as to avoid injury or breaking the cutter.

2、 When removing the tool, first observe whether the spindle stops rotating.

4、 The wrench should be put in the tool storage area after use.

5、 In the process of machining, the operator is not allowed to observe the cutting position closely to prevent chips from crashing into the eyes.

6、 Before the start of processing, check the position of the oil nozzle before opening the oil pump switch to avoid spraying oil to other positions.

7、 When pausing to observe the machining gap, the worktable must be moved away from the cutting position.

8、 After processing and before disassembling the workpiece, we must first carry out the necessary preliminary inspection of size or appearance, and only after the inspection is qualified can we disassemble the workpiece, so as to avoid the positioning problem of secondary processing and the scrapping of the workpiece after disassembly.

About the author

chengcg administrator

    Leave a Reply