1. Before processing, it is necessary to determine the processing technology, make clear the content of the process card, especially to determine the shape of the parts to be processed, and know the content of the next processing program.
2. The blank size should be measured before clamping, and the blank placement must be carefully checked to see if it is consistent with the programming.
3. After the rough machining of the blank is completed, maintenance should be carried out to determine whether the workpiece is correctly divided? Computer gong processing | Dongguan high-speed computer gong processing | Dongguan mold processing | Dongguan Mechanical parts processing | CNC processing whether there is dislocation loosening? Is the dimension from the processing part to the reference point meet the drawing requirements? After checking, the shape and scale of rough machining should be measured timely and accurately.
4. Semi finishing or finishing can only be carried out after rough machining and maintenance is completed. After CNC machining, technicians should check the shape and size of the processing parts. Computer gong processing | Dongguan computer gong processing | Shenzhen computer gong processing | mechanical parts processing | Guangzhou computer gong processing mainly check the vertical and inclined processing parts and the base point size marked on the measurement drawing,
When machining with CNC engraving and milling machine, try not to use the maximum cutting capacity of the cutting tool for processing. The cutting tool of each material will have a maximum cutting amount. because
Because this value is only a reference value for users, it can not exceed this value, so in actual operation, try to be less than this value and control it at the value
Two thirds of that would be ideal. In this way, the tool can be used for a long time, and the tool life will be longer.
In addition, CNC engraving and milling machine processing will be
It is divided into two parts: rough machining and finish machining. The first part of rough machining should be faster and better in overall speed and tool selection, and all surplus parts should be cut off as much as possible
In order to save time and improve work efficiency, finishing is to adjust the speed of CNC engraving and milling machine appropriately to ensure the fine processing of products.
And it is a kind of application technology constrained by its own economic strength. Computer gong processing, Dongguan high-speed computer gong processing, Dongguan mold processing, Dongguan Mechanical parts processing, CNC machining center selection, because the price is far more expensive than ordinary machine tools, so it is subject to more constraints, and whether the machine tool selection is reasonable or not is more prominent. Correct selection of machining center is the key to make good use of machining center and make it play an effective role.
About the author