CNC parts processing technology skills

Now understand the CNC parts processing technology and operation skills. Mechanical parts processing is under the established production conditions. For the reasonable process and operation method, the processing method is compiled in the prescribed form to guide the production and processing steps after approval. With the continuous change of CNC machining system, take a look at the precision machining manufacturers of CNC parts processing, and summarize the following points.

It can be understood as a small skill in the process of precision CNC machining

In the process of precision parts processing, when the hexagon wrench is short and can not bear the pressure, the pipe with the inner diameter slightly larger than the wrench can be inserted into the groove from a part of the milling groove. Inside the slot, it can be used as a long handle. In the process of CNC machining, many precision parts are not produced at one time, but when mechanical parts are produced, it is just a rough model. If the processing factory becomes a real product, it is also processed by some mechanical equipment according to different production and processing processes. Processing can eventually become a valuable product.
Precision CNC machining, using magnet to absorb small parts (cost) is not convenient to suck. The iron plate can be sucked under the magnet, which can not only suck many small pieces, but also pull out the iron plate from the small pieces, which will automatically pour into the collection box immediately. Not impressive enough, but very practical.
When driving the pulley in precision CNC machining, the pulley often slides between the pulley and the shaft. Draw a series of sockets on the shaft with 15 ~ 18mm trocar. This can form adsorption to prevent slipping, and turn waste into treasure, improving the value of long-term use.
In CNC machine tool processing, it is necessary to remove the jaws of vise, add two M4 threaded holes, two steel plates with jaws and 1.5mm thickness, rivet the hard brass plate with aluminum countersunk head rivet and 0.8mm thickness, and fix the hard brass plate on the jaws with M4 countersunk head screw to form a durable soft jaw. This can also protect precision parts from being damaged by clamping, and can be reused. It can be regarded as protecting the appearance details of precision CNC machining.

The above is about CNC parts processing technology tips, many precision parts processing requirements are relatively high, the use of tips can avoid quality problems and improve production and processing efficiency!