What are the specific processing methods? People may not know how it is processed. If there is still something you don’t understand, you can pay attention to the following relevant information!
1、 Plane hole series parts
Computer gong machine tools (such as computer gong drilling machine) are commonly used for processing. When selecting the process route, the two principles of processing accuracy and processing efficiency are mainly considered.
2、 Rotating parts
Commonly used computer gong lathe or grinder processing.
1. Considering the machining efficiency: when machining on the lathe, the machining allowance is usually large, so the rough machining route must be arranged reasonably to improve the machining efficiency. In actual programming, it is not suitable to use cycle instruction (otherwise, there are too many empty knives at the working speed). Computer gong processing | Dongguan computer gong processing shop | high speed computer gong processing | mechanical parts processing | computer gong processing shop | computer gong processing shop | the better method is to use rough lathe to cut materials as soon as possible, and then finish turning.
2. Considering the strength of tool tip: low strength tools are often used to process small grooves on computer gongs and lathes.
3、 Plane profile parts
1. Cutting in and cutting out direction control: radial cutting in, leaving pits on the surface of the workpiece; transverse cutting in and cutting out, the workpiece surface is smooth.
2. Selection of one-time approximation method: when the computer gong machine tool with only linear and circular interpolation function can process irregular curve contour, it needs to use tiny straight line segment or arc segment to approximate the processed contour (the error is called primary approximation error). When computer gong machining | Dongguan computer gong processing shop | high-speed computer Gong processing | mechanical parts processing | computer gong processing shop | computer gong processing shop | computer gong processing shop | computer gong processing | computer gong processing shop | Machining should make the workpiece error within the acceptable range, and the number of program segments is better.
There are many classifications of large-scale Longmen computer gong processing center
1. Horizontal machining center: it refers to the machining center with the spindle axis parallel to the worktable, which is mainly suitable for machining box type parts.
2. Vertical machining center: it refers to the machining center with the spindle axis perpendicular to the worktable. It is mainly used for processing complex parts such as plates, plates, molds and small shells.
3. Multi axis linkage machining center, also known as universal machining center: computer gong processing | Dongguan computer gong processing shop | high speed computer gong processing | mechanical parts processing | computer gong processing shop | refers to the angle between the processing spindle axis and the rotary axis of the worktable to control the linkage change
