Wax cleaning for stainless steel parts

I. scope of application:
A. is suitable for dewaxing, deoiling and degreasing of metal workpiece after mechanical polishing.
B. is suitable for bulk and large output parts to save wax, remove dirt and save cost.
C, suitable for viscous dry oil cleaning (other methods are difficult to remove).
Function: it can remove the wax layer on the surface of the workpiece quickly and cleanly and cleanly.
Suitable material: suitable for all metals (steel, copper, aluminum, iron…). Polish the wax. Cleaning copper and aluminum parts will not change color.


Two, advantages:
1 remove the dirt and remove dirt quickly, and the effect is good; it can remove thick wax layer.
2 low cost and low cost.
3 all kinds of materials are used to solve the problem of changing color in the market compared to copper and aluminum parts.
4 reduce workers’ labor intensity, high production efficiency and low cost.


Three, service life:
The liquid content of the 1 kg raw liquid will not be lost within the area of 60~80 square meters.


Four. Usage:
1, the degreasing agent is mixed with water, the ratio is 1:95~97 (the concentration is 3%~5%).
2. When the solution is heated to 60~80 degrees, immersion, airflow or ultrasonic cleaning can be used.
3. The general dewaxing time is 5-15 minutes (the user holds the wax layer according to the thickness of the workpiece), if it cooperates with ultrasonic cleaning, the dewaxing effect is better and faster. The effect of heating and waxing is better and faster (the higher the temperature is, the faster the decontamination is).
4. Rinse and dry after the wax.