Our workshop is machining services for CNC Machining parts, metal stamping parts, turning parts, cnc parts, Springs,coldforming parts, machining parts, screw machine parts, casting parts, forging parts supplier, Wecan produce machined parts according to your requirements.
machining parts: Hydraulic, valve, flange, automobile, shaft, bearing housing Bar, plate,welded part, marine part, winch part, sheet metal Equipment: Common lathe,CNC Machine,Milling,Turning,Stamping Machine,Spring Machine
Metal Process: CNC turning, milling, drilling, planning, grinding, welding. Surface Treat: Zn (Cr3 RoHS free or Cr6 ) plated, Cr /Ni plated, hot-dip galvanizing, paint,anodize, powder coating, brush, Polish Technical: Dedicated mechanical designer, experienced worker 3D design service inclusive of modeling, analysis and detailed drawing at normal cost
Quality: ISO 9001: 2008
Control strictly and follow specification
Move fast to meet your urgent need caused by accident.
Packing: Wooden case, hardboard, steel pallet, accord
………………………………………………………………………………………………………..
The important role of the tool point in NC machining and the way to determine the tool setting point. The starting point of the program is the movement of the tool relative to the workpiece during NC machining. In NC programming, the following points should be considered when choosing tool points.
1. The non program programming is simple.
2, the error caused by the processing is minimal.
3. It is easy to check in the process of processing.
4, the tool point is easy to find on the CNC machine tool.
5, it is easy to calculate the coordinate value of the knife point.
6, try to make the process of cutting or retracting the shortest path, and easy to change the knife.
7, try to coincide with the design datum or positioning datum of parts. For example, the location of holes with holes is better as the center hole of the hole, so the positioning error can be reduced. The tool point can be located on the machined parts, and can also be located on the auxiliary datum of the fixture, but it must have a certain dimension relationship with the positioning datum of the parts, so as to ensure the relationship between the machine tool coordinate system and the workpiece coordinate system.
About the author