- Processing technology
The so-called technology is the problem of how to process and how to process. When we are familiar with the cutting ability of cutting tools to materials, the computer gong processing factory understands that the software can control, and then the problem of how to cut is good. For example, if you want to cut (process) a plane or a corner of a mold (part), how to make it more smooth, whether it will touch the fillet at the bottom, whether it is beautiful to process, whether it will have allowance, and so on.
- Metal cutting
To know the characteristics of cutting tools on materials, heating, overload, speed, cutting depth of each layer, skills are required: metal materials, cutting tool materials and types, cutting ability of cutting tools on metal, mechanical analysis, you can find some books on this, there are many bookstores. You need to know what kind of speed this knife should give to cut this metal material. How many millimeters can you run per minute, and how deep can you process each layer.
- Control part
This part is a pure software problem, how to cut, think well, analyze thoroughly, we need software to control, produce the desired cutting mode. After selecting the surface or solid to be machined, many values are set in turn, such as depth control, processing from Z height to height, processing depth of each layer, how to lift the tool between layers, processing range control, etc.
About the author