Computer gong is a kind of artificial intelligence, which is controlled by computer to complete complex processing.
Computer gong processing is also called CNC milling machine processing, CNC milling machine is developed on the basis of general milling machine, the two processing technology is basically the same, the structure is also somewhat similar, CNC milling machine is in the general milling machine integrated digital control system, can be under the control of the program code more accurate milling machine.
1、 Testing standard of computer gong before processing
- Divide the center and copy the number. After each division, first copy the work coordinate number, and then recheck whether the distance from the center to both sides is consistent after clearing, so as to ensure that the division and copy are correct.
- Tool selection, tool loading, tool setting and z-axis coordinate counting. Select the right tool according to the programming list, clean the tool head and nozzle thoroughly before installing the tool, and use the calibration table to check whether the tool has deflection after installing the tool. Check again after reading the number of correct knives to avoid the serious loss to the company caused by the wrong number of correct knives.
- transmit program, start processing: use the single section execution before the knife, transfer the speed and feed speed to the slowest, slow down the knife, watch the machine tool showing the Z axis margin, check whether there is any abnormal, if abnormal, press the pause button immediately, find out the reason to solve the anomaly, confirm that everything is adjusted to the right speed to start processing.
- In the process of machining, it is necessary to observe whether the machining is abnormal and whether the tool is worn. If the tool is seriously worn, it is necessary to stop grinding to ensure the normal machining.
About the author