In order to improve the company’s efficiency and ensure the delivery time of parts processing, it is necessary to standardize the operation methods.
2 scope of application
Applicable to the company computer gong operator.
3 responsibilities and authorities
Daily cleaning and maintenance work and training for users, correct operation and use of computer gongs.
Work content:
Clamping method and tool use standard before processing:
Press bar, vise, magnetic table, fixture, select the best clamping mode according to the applicability of the workpiece.
Laminating: pay attention to the cleaning of the burr and scrap iron on the plane of the machine and the adjustment of the height of the strip, so as to avoid the collision between the knife arm and the strip.
. vise: pay attention to the cleaning of the fixed surface and moving surface of the vice and the clamping force.
Magnetic table: when using the magnetic table, it is necessary to consider whether the bottom of the workpiece is flat, the adsorption surface should be large enough, and the processing cushion block of the workpiece edge should be blocked. In order to ensure that the process will not be loose.
About the author