- When processing parts, the protective door must be closed. It is not allowed to stretch the head and hand into the protective door. It is not allowed to open the protective door during processing;
- During the processing of Dongguan computer gong, the operator shall not leave the machine without authorization, and shall keep a high degree of concentration and observe the running state of the machine tool. In case of any abnormal phenomenon or accident, the program operation shall be terminated immediately, the power supply shall be cut off and the instructor shall be informed in time. No other operation shall be carried out;
- It is strictly forbidden to beat the control panel and touch the display screen. It is strictly forbidden to knock the worktable, dividing head, clamp and guide rail;
- It is forbidden to open the control cabinet of CNC system to watch and touch without permission;
- Dongguan computer gong processing operators are not allowed to change the internal parameters of the machine. Interns are not allowed to transfer or modify other programs that are not compiled by themselves;
- On the control computer of machine tool, no other operation is allowed except program operation, transmission and program copy;
- CNC milling machine belongs to large precision equipment. In addition to tooling and workpieces placed on the worktable, it is strictly forbidden to stack any tools, clamps, cutting edges, measuring tools, workpieces and other sundries on the CNC Gong processing machine tool in Dongguan;
- It is forbidden to touch the blade tip and iron filings by hand. Iron scraps must be cleaned with iron hook or brush;
- It is forbidden to touch the rotating spindle, workpiece or other moving parts by hand or any other means;
- It is forbidden to measure the workpiece and change the speed manually in the process of processing. It is not allowed to wipe the workpiece with cotton thread or clean the machine tool;
- No attempt operation is allowed;
- When using the handwheel or fast moving mode to move the position of each axis, make sure to see the “, -” signs in all directions of X, y and Z axes of the machine tool before moving. When moving, slowly turn the hand wheel to observe the moving direction of the machine tool, and then speed up the moving speed.
Computer gong processing safety precautions
chengcg administrator
Leave a Reply
Leave a Reply
-
- CNC Machining
-
- CNC Machining
-
- CNC turned
-
- CNC Machining
-
- CNC Turning
-
- CNC Milling service
About the author