In the process of processing, there must be some factors that affect our work efficiency, of course, it will also affect our work effect. When these problems occur, we must deal with them in time to avoid more failures in the future. We must deal with them in time. There are many factors affecting the processing effect. Let’s learn about the influence of CNC plus What are the labor factors?
- Before processing, it is necessary to determine the processing technology, make clear the content of the process card, especially to determine the shape of the parts to be processed, and know the content of the next processing program.
- The blank size should be measured before clamping, and the blank placement must be carefully checked to see if it is consistent with the programming.
- After the rough machining of the blank is completed, maintenance should be carried out to determine whether the workpiece is correctly divided? Is the workpiece dislocated and loose? Is the dimension from the processing part to the reference point meet the drawing requirements? After checking, the shape and scale of rough machining should be measured timely and accurately.
- Semi finish machining or finish machining can only be carried out after the rough machining and maintenance is completed. After finishing the processing, the technician shall check the shape and size of the processing parts, mainly check the vertical and inclined plane processing parts and the base point size marked on the measurement drawing for approval.
- After the completion of manual maintenance, it can be removed only after confirming that the drawing process meets the relevant requirements, and the workpiece is sent to the quality inspector for special inspection
About the author