Computer gong is a kind of artificial intelligence, which is controlled by computer to complete complex processing.
Computer gongs processing is also known as CNC milling machine processing, CNC milling machine is developed on the basis of general milling machine, the processing technology of the two is basically the same, the structure is also somewhat similar, CNC milling machine is in the ordinary milling machine integrated digital control system, under the control of program code more accurate milling processing machine tool.
1、 Inspection standard of computer gongs before processing
- Divide the center and read the number. After each time, copy the number of working coordinates. After clearing, check again whether the distance from the center to both sides is consistent, so as to ensure that the center and reading are correct.
- Tool selection, tool loading, tool setting and z-axis coordinate reading. Select the appropriate tool according to the programming list. Clean the cutter head and nozzle thoroughly before installing the tool. After installing the tool, use the calibration table to check whether the tool has deflection. It is necessary to check again after the tool is set and the number is read, so as to avoid the wrong knife, which will bring great loss to the company.
- transmit program, start processing: use the single section execution before the knife, transfer the speed and feed speed to the slowest, slow down the knife, watch the machine tool showing the Z axis margin, check whether there is any abnormal, if abnormal, press the pause button immediately, find out the reason to solve the anomaly, confirm that everything is adjusted to the right speed to start processing.
- In the process of processing, always pay attention to observe whether the processing is abnormal and whether the tool is worn. If the tool wear is serious, the grinding shall be suspended to ensure the normal processing.
About the author