Analysis of the characteristics of hardware and QDC mould products

1. Hardware mold:
It is a combination mold, mainly stamping material is hard, or need bending process, also can design mold function according to the product. But the relative price is higher, the mold cycle is longer, the accuracy is not high, and the accuracy is at + 0.1mm.
1) blanking die:
A mold that causes a material to be separated along a closed or open contour. For example, blanking die, piercing die, cutting die, cutting die, trimming die, cutting die, etc.
2) bending die:
A die for bending or deforming a blank or other blank along a straight line (curved curve) to obtain a certain angle and shape.
3) deep drawing die:
It is a mould for making hollow blank of sheet blank, or changing the shape and dimension of hollow parts further.
4) forming die:
The blank or semi-finished workpiece is directly copied and shaped according to the convex and concave shape of the figure, while the material itself produces only partial plastic deformation. For example, bulging die, necking die, expanding die, forming die, flanging die, shaping die and so on.