GFRP grille cutting method

Introduction of GFRP grille cutting method:
For the installation of grille, we must first do the work of grille cutting.
1. according to the size and installation requirements, the grid is reasonably cut and processed to maximize economic efficiency without affecting the internal performance of the grille. The cutting face must be coated with resin to ensure that its decay resistance is not affected.
A. cutting:
Linear cutting: FRP grille can be cut on the spot with ceramic disc or emery disc cutter, or even ordinary hacksaw blade.
Curve cutting: grille openings, arc and other arc cutting can be installed with metal cutting blades electric saw or hacksaw.
B. drilling:
Holes above 12mm can be drilled with regular drill drills.
Small holes can be machined by hand held electric hole machining tools or general electric drill.
C. grinding:
It can be polished by hand angle polisher, grinding wheel, ordinary file and sandpaper.
Note: A. This material cannot be turned and tapped.
B. arbitrary cutting will not change the mechanical properties of the grille, but will not cause any other consequences.
2. security measures:
Before cutting, operating workers should wear protective glasses and masks to prevent objects from splashing into the eyes and reduce dust inhalation; wear gloves and work clothes to prevent dust from entering the skin; choose a well ventilated and bright spot for cutting; before cutting, all electric tools should be checked to see if all electric tools are complete.