ow more and more people in the factory shop begin to use the five axis machine, which is helpful to improve the processing and production speed of the parts. It also has a great improvement in the quality. In the process of operation of the equipment, we need to carry out the maintenance in order to prolong the service life of the walking machine, if it is not properly operated. And maintenance may lead to a series of problems.
2-TCKZ-20N-400-400
1. Keep the environment neat and tidy
Five axis walking machine in the use of the environment is required, it must be clean and dust free, air can not be too wet or too dry, especially not able to have corrosive gas, otherwise the long term will be eroded to equipment accessories, if too many impurities in the use of the use of some of the time will appear. In order to prevent the damage of the machine and prolong the running time of the equipment, we all need to keep the clean and tidy environment in the workshop, and have a clear effect on extending the time of using the equipment.
Two, keep the cleanliness of the heart machine itself
For the staff, it is necessary to keep the machine clean at all times. This is a very important part of their work. The enterprise needs to formulate rules to clean up the main parts of the machine in each handover class, including the worktable, the operation panel, etc. The knife shelf requires more emphasis on nursing, it needs to be wiped clean with soft cotton yarn, and then smeared on the clean knife shelf, which can effectively prevent the corrosion of the plate.
In addition, every week, all the equipment needs to be cleaned and cleaned, such as the cleaning and cleaning of the dust net, filter, chip and so on, and some other parts should be carried out according to the reference.
Three. Periodic examination
1, we need to conduct regular inspections of all parts of the five axis machine, including hydraulic system, lubrication system, cooling system and so on.
2, the button and switch on the machine also need regular inspection and maintenance, so that the problem can be found in the fastest time, and then eliminate the hidden danger.
3, it is necessary to check the wear and tightness of the belt regularly, the lubricating oil is not clean and free of impurities, and the rest of the parts, including the contactor, relay and so on, need to be checked.
4, the need to focus on the inspection is to walk the heart of the heat dissipation ventilation device, if no regular inspection, it is easy to appear the abnormal operation of the device, will cause a series of applause, such as the working environment of electrical components.
Four, stop the failure operation of machine tool belt
If a variety of components in the heart machine fail, they can not continue to run, especially the failure of the mechanical part. At this time, it is necessary to stop work immediately, analyze the causes of the failure, and then do the repair after the cause, and then continue to run. If there is a fault in the machine, but it will not be stopped, it will cause serious damage to the equipment.
The above is about a number of maintenance work on the five axis walking machine, the standard production of the walking machine today because it has the advantage of shortening the manufacturing process chain, can improve the efficiency of production and processing, at the same time can reduce the operation time of the workers, the produced parts have higher precision.
About the author