Matters to be paid attention to in the use of a scratch platform

The precision of the line platform / line plate can be maintained for about 2 years. Even if the precision is not required, the precision can be achieved by the debugging of the platform or the artificial scraping and research. When using the platform to line the workpiece, the workpiece should be light and light to avoid the bump on the platform. In addition, it should be supported reasonably according to the contact mode of the workpiece and the platform. If the contact with the platform is supported on the four sides, but if it is point contact, not only to support the platform, in contact with the platform, in contact with the platform. Additional support points should be added nearby to avoid damage to the platform.
The placement of scribing platforms / scribing plates should be based on the appropriate placement method, and the platform should be adjusted as far as possible, so as not to move as far as possible.
How to choose the scribing platform, according to different levels of customer needs are mainly divided into three kinds:
1. Microcomputer controlled single arm electronic marking platform
2, digital display electronic marking platform
3. Microcomputer controlled door type electronic marking platform
Testing the tensile properties of samples is one of the important indicators of quality testing. Almost all the quality laboratories in the rubber related industries will be equipped with one and more lines. However, during the maintenance period, the author found that the configuration of the scribing platforms in many laboratories may not meet the requirements of relevant standards. This is due to the unprofessional reasons of the users of the test machine, and the poor communication between the salesmen. Of course, there are also some reasons for the lack of standard awareness of most of the users of mining and mining enterprises.