1. Benchmark first
That is to say, the datum plane should be processed first. In the process of machining, the surface as the positioning datum should be processed first, so as to provide the precision datum for the subsequent processing as soon as possible.
2. Division of processing stages
The appearance with high machining quality request can be divided into three stages: rough machining, semi finish machining and finish machining. The main purpose is to ensure the processing quality; to facilitate the scientific application of equipment; to facilitate the arrangement of heat treatment process; and to facilitate the detection of blank defects.
3. Face before hole
For the box, bracket, connecting rod and other parts, the plane shall be machined before the hole is machined. In this way, the hole can be machined by plane positioning, ensuring the position accuracy of plane and hole, and bringing convenience to the machining of hole on plane.
4. Finishing
Finishing of main surfaces, such as grinding, honing, finishing, rolling, etc., shall be placed at the end of the process route. The general principle of drawing up the processing route of precision parts and the formulation of the processing procedure of precision parts can be roughly divided into two parts. First of all, it is to draw up the process route of parts processing, and then determine the process size of each process, used equipment and process equipment, cutting specifications, working hours quota, etc.
About the author