What should be paid attention to in CNC machining?

Nowadays, with the continuous improvement of science and technology, our industry needs to use a variety of processing, in the process of processing, we will inevitably have a variety of problems, or we need to comply with the problem, Dongguan CNC parts processing is one of them, so what should be paid attention to CNC parts processing?

1. Observe the operation regulations of machining center.

2. Before work, wear protective equipment and cuff as required. Scarf, gloves, tie and apron are not allowed. Women’s hair braid shall be tied in the hat.

3. Check whether the tool compensation, machine zero point, workpiece zero point, etc. are correct before starting the machine.

4. The relative position of each button shall meet the operation requirements. Carefully compile and input numerical control program.

5. Check the operation conditions of the protection, safety, signal, position, mechanical transmission part, electrical, hydraulic digital display and other systems on the equipment, and carry out cutting under all normal conditions.

6. Before the CNC parts are processed, the test run of the machine tool shall be carried out to check the operation conditions of the lubrication, mechanical, electrical, hydraulic, digital display and other systems, and the machining can be carried out under normal conditions.

7. After the machine tool enters the processing operation according to the program, the operator is not allowed to contact the moving workpiece, cutter and transmission part, and is not allowed to transfer or take tools and other items across the transmission part of the machine tool.

8. When adjusting the machine tool, clamping workpiece and cutter, and wiping the machine tool, stop the machine.

9. Tools or other articles shall not be placed on electrical appliances, operation cabinets and protective covers.

10. It is not allowed to remove iron chips directly by hand, and special tools shall be used for cleaning.

11. In case of abnormal condition and alarm signal, stop the vehicle and ask relevant personnel to check. CNC machining center.

12. It is not allowed to leave the work position when the machine tool is running. If you want to leave for some reason, put the workbench in the middle position, return the cutter bar, stop the machine, and cut off the power supply of the main machine.